INTERNATIONAL JOURNAL
INTERNATIONAL JOURNAL
| No. | International Journal |
|---|---|
| 130 | S. Maeng, J.H. Ahn, & B.K. Min, “Effect of the Built-Up-Edge on Tool Wear in Machining of STAVAX”, International Journal of Precision Engineering and Manufacturing, 2024. |
| 129 | C. Oh, J.H. Lee, T.I. Ha, & B.K. Min, “Model Parameter Identification of a Machining Robot Using Joint Frequency Response Functions”, International Journal of Precision Engineering and Manufacturing, 2023. |
| 128 | G. Kim, H. Jo, J.S. Shin, & B.K. Min, “Tool Wear Reduction Using Directional Milling Considering Cutting Angle in Carbon fiber Reinforced Plastic Machining”, International Journal of Precision Engineering and Manufacturing, 2023. |
| 127 | T.I. Ha, J.H. Lee, & B.K. Min, “Relative Positioning Error Minimization of the Dual-Robot System with Kinematic and Base Frame Transformation Parameter Identification”, IEEE Access, 2023. |
| 126 | J.G. Kang, J.S. Lee, and B.K. Min. & E.G. Kang, “Inlet Hole Shape Analysis Depending on the Focus Conditions for Electron Beam Micro-hole Drilling,” International Journal of Precision Engineering and Manufacturing, 2023. |
| 125 | S.H. Hwang, S. Woo, J.M. Lim, and B.K. Min, “Real-time hand ownership decision in egocentric view using kinematic approach,” Journal of Ambient Intelligence and Humanized Computing, 2023. |
| 124 | J.H. Ahn, G. Kim, and B.K. Min, “Exit delamination at the material interface in drilling of CFRP/metal stack,” Journal of Manufacturing Processes, Vol. 85, pp. 227-235, 2023. |
| 123 | J.H. Lee, S.H. Kim, and B.K. Min, “Posture optimization in robotic drilling using a deformation energy model,” Robotics and Computer-Integrated Manufacturing, Vol. 78, 2022. |
| 122 | Y. Lee, J. Cheon, B.K. Min and C. Kim, “Optimization of gas shielding for the vacuum laser beam welding of Ti-6Al-4 V titanium alloy,” The International Journal of Advanced Manufacturing Technology, Vol. 123, pp. 1297-1305, 2022. |
| 121 | Y. Lee, J. Cheon, B.K. Min and C. Kim, “Contamination suppression of coupling glass during vacuum laser welding,” Science and Technology of Welding and Joining, Vol. 27, pp. 541-552, 2022. |
| 120 | K. Song, G. Kim, H. Yun, B.K. Min, and M.B.G. Jun, “Machining sound analysis for the effects of fiber bending on cutting mechanisms during carbon fiber reinforced plastic composite milling,” Composites Part B: Engineering, Vol. 241, 2022. |
| 119 | S.H. Kim, and B.K. Min, “Real-time tool path modification for machine tool contour error reduction,” The International Journal of Advanced Manufacturing Technology, Vol. 120(9-10), pp. 6969-6981, 2022. |
| 118 | G. Kim, K. Song, M.B.G. Jun, Y.H. Jeong, T.G. Kim, and B.K. Min, “Effect of fiber bending induced matrix shear behavior on machined surface quality in carbon fiber reinforced plastic milling,” Composite Structures, Vol.?287, 2022. |
| 117 | C.Y. Lee, S.H. Hwang, and B.K. Min, “Simulation-based optimization of CNC interpolator parameters for machining accuracy improvement,” The International Journal of Advanced Manufacturing Technology, Vol. 119(5-6), pp. 3757-3770, 2020. |
| 116 | G. Kim, T.G. Kim, S.W. Lee, and B.K. Min, “Effect of workpiece preheating on tool wear and delamination at the hole exit in high feed drilling of carbon fiber reinforced plastics with diamond-coated tools.” Journal of Manufacturing Processes, Vol. 74, pp. 233-243, 2022. |
| 115 | Y. Lee, J. Cheon, B.K. Min, and C. Kim, “Modelling of fume particle behaviour and coupling glass contamination during vacuum laser beam welding,” Science and Technology of Welding and Joining, Vol. 27, No. 1-13, 2022. |
| 114 | C.Y. Lee, S.H. Hwang, E. Nam, and B.K. Min, “Identification of mass and sliding friction parameters of machine tool feed drive using recursive least squares method,” The International Journal of Advanced Manufacturing Technology, Vol. 109, No. 9-12, pp. 2831-2844, 2020. |
| 113 | S.H. Kim, and B.K. Min, “Joint Compliance Error Compensation for Robot Manipulator Using Body Frame,” International Journal of Precision Engineering and Manufacturing, Vol. 21, No. 6, pp. 1017-1023, 2020. |
| 112 | S.H. Kim, E. Nam, T.I. Ha, S.H. Hwang, J.H. Lee, S.H. Park, and B.K. Min, “Robotic machining: A review of recent progress,” International Journal of Precision Engineering and Manufacturing, pp. 1-14, 2019. |
| 111 | E.G. Kang, H.Z. Choi, B.K. Min, and S.J. Lee, “Ultrasonic impact treatment and corrosion test after the austenite phase transformation of SKD11 using a plasma diode electron beam,” Journal of Materials Processing Technology, Vol. 267, No.1, pp. 80-89, 2019. |
| 110 | S.H. Park, E. Nam, M.G. Gang, and B.K. Min, “Post-machining deformation analysis for virtual machining of thin aluminium alloy parts,” International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 4, pp. 687-691, 2019. |
| 109 | Y. Lee, J. Cheon, B.K. Min, and C. Kim, “Contamination of Coupling Glass and Performance Evaluation of Protective System in Vacuum Laser Beam Welding,” Applied Sciences, Vol. 9, No. 23, pp. 5082, 2019. |
| 108 | M.G. Gang, K.W. Chae, W.B. Kim, Y.H. Jung, M.B. Jun, and B.K. Min, “Wettability modification of cyclic olefin copolymer surface and microchannel using micromilling process,” Journal of Manufacturing Processes, Vol. 37, No.1, pp. 168-176, 2019. |
| 107 | E. Nam, H. Jo, J. Min, S.J. Lee, and B.K. Min, “Effect of chemical oxidizer on material removal rate in electrochemical oxidation assisted machining,” Journal of Materials Processing Technology, Vol. 258, No.1, pp. 174-179, 2018. |
| 106 | C.Y. Lee, S.H. Kim, T.I. Ha, J. Min, S.H. Hwang, and B.K. Min, “CNC Algorithms for Precision Machining: State of the Art Review,”?Journal of the Korean Society for Precision Engineering,?Vol. 35, No. 3, pp. 279-291, 2018. |
| 105 | H.E. Joe, H. Yun, S.H. Jo, M.B.G. Jun, and B.K. Min, “A review on optical fiber sensors for environmental monitoring,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 5, No. 1, pp. 173-191, Jan 2018. |
| 104 | H.E. Joe, W.S. Lee, M.B.G. Jun, N.C. Park, and B.K. Min, “Material interface detection based on secondary electron images for focused ion beam machining,” Ultramicroscopy, Vol. 184, pp. 37-43, 2018. |
| 103 | K. Song, M.G. Gang, M.B.G. Jun, and B.K. Min, “Cryogenic machining of PDMS fluidic channel using shrinkage compensation and surface roughness control,” International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 12, pp. 1711-1717, 2017. |
| 102 | J.Y. Park, H.E. Joe, H.S. Yoon, S. Yoo, T. Kim, K. Kang, B.K. Min, and S.C. Jun, “Contact effect of ReS2/metal interface,” ACS applied materials & interfaces, Vol. 9, No. 31, pp. 26325-26332, 2017. |
| 101 | E. Nam, C.Y. Lee, J. Min, S.J. Lee, and B.K. Min, “Effect of electrochemical conditions on material removal rate in electrochemical oxidation assisted machining,” Journal of The Electrochemical Society, Vol. 164, No. 2, pp. E23-E28, 2017. |
| 100 | W. Lee, S.H. Kim, J. Park, and B.K. Min, “Simulation-based machining condition optimization for machine tool energy consumption reduction,” Journal of cleaner production, Vol. 150, pp. 352-360, 2017. |
| 99 | E.G. Kang, H.Z. Choi, B.K. Min, and S.J. Lee, “Plasma diode electron beam heat treatment of cast iron: Effect of direct preheating,” International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 10, pp. 1339-1345, 2017. |
| 98 | E.G. Kang, H. Choi, B.K. Min, and S.J. Lee, “Austenite phase transformation of SKD11 by surface heat treatment with a focused electron beam,” Surface and Coatings Technology, Vol. 321, pp. 247-256, 2017. |
| 97 | M.S. Han, K.W. Chae, and B.K. Min, “Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micromilling process,” Journal of Micromechanics and Microengineering, Vol. 27, No. 5, p. 055004, 2017. |
| 96 | Y. Cho, F. Ahmed, H.E. Joe, H. Yun, B.K. Min, and M.B. Jun, “Fabrication of a Screw-Shaped Long-Period Fiber Grating for Refractive Index Sensing,” IEEE Photonics Technology Letters, Vol. 29, No. 24, pp. 2242-2245, 2017. |
| 95 | H.S. Yoon, H.E. Joe, S.J. Kim, H.S. Lee, S. Im, B.K. Min, and S.C. Jun, “Layer dependence and gas molecule absorption property in MoS 2 Schottky diode with asymmetric metal contacts,” Scientific reports, Vol. 5, p. 10440, 2015. |
| 94 | E. Nam, C.Y. Lee, M.B.G. Jun, and B.K. Min, “Ductile mode electrochemical oxidation assisted micromachining for glassy carbon,” Journal of Micromechanics and Microengineering, Vol. 25, No. 4, p. 045021, 2015. |
| 93 | W.S. Lee, T. Kim, G.J. Choi, G. Lim, H.E. Joe, M.G. Gang, H. Moon, D.H. Kim, B.K. Min, and Y.P. Park, “Experimental demonstration of line-width modulation in plasmonic lithography using a solid immersion lens-based active nano-gap control,” Applied Physics Letters, Vol. 106, No. 5, p. 051111, 2015. |
| 92 | W. Lee, E. Nam, C.Y. Lee, K.I. Jang, and B.K. Min, “Electrochemical oxidation assisted micromachining of glassy carbon substrate,” International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 3, pp. 419-422, 2015. |
| 91 | W. Lee, C.Y. Lee, Y.H. Jeong, and B.K. Min, “Friction compensation controller for load varying machine tool feed drive,” International Journal of Machine Tools and Manufacture, Vol. 96, pp. 47-54, 2015. |
| 90 | W. Lee, C.Y. Lee, Y.H. Jeong, and B.K. Min, “Distributed component friction model for precision control of a feed drive system,” IEEE/ASME Transactions on Mechatronics, Vol. 20, No. 4, pp. 1966-1974, 2015. |
| 89 | W.B. Kim, E. Nam, B.K. Min, D.S. Choi, T.J. Je, and E.C. Jeon, “Material removal of glass by magnetorheological fluid jet,” International journal of precision engineering and manufacturing, Vol. 16, No. 4, pp. 629-637, 2015. |
| 88 | E.G. Kang, J.S. Kim, S.W. Lee, B.K. Min, and S.J. Lee, “Emission characteristics of high-voltage plasma diode cathode for metal surface modification,” International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 1, pp. 13-19, 2015. |
| 87 | H.E. Joe, J.H. Park, S.H. Kim, G. Kim, M.B. Jun, and B.K. Min, “Effects of coating material on the fabrication accuracy of focused ion beam machining of insulators,” Japanese Journal of Applied Physics, Vol. 54, No. 9, p. 096602, 2015. |
| 86 | H.E. Joe and B.K. Min, “3D thickness profile measurement of thin films coated on the microscopic area,” Measurement Science and Technology, Vol. 26, No. 6, p. 065602, 2015. |
| 85 | S. Heo, M. Lee, S.H. Kim, W. Lee, and B.K. Min, “Compensation of tool deflection in micromilling using workpiece holder control device,” International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 6, pp. 1205-1208, 2015. |
| 84 | F. Ahmed, H.E. Joe, B.K. Min, and M.B.G. Jun, “Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation,” Optics & Laser Technology, Vol. 74, pp. 119-124, 2015. |
| 83 | M. Pournoury, H.E. Joe, J.H. Park, T. Nazari, Y.M. Sung, B.K. Min, S. Im, D. Kim, and K. Oh, “Polarization-dependent transmission through a bull’s eye with an elliptical aperture,” Optics Communications, Vol. 316, pp. 1-4, 2014. |
| 82 | W. Lee, C.Y. Lee, and B.K. Min, “Simulation-based energy usage profiling of machine tool at the component level,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, pp. 183-189, 2014. |
| 81 | W.W. Kim, M.G. Gang, B.K. Min, and W.B. Kim, “Experimental and numerical investigations of cavity filling process in injection moulding for microcantilever structures,” The International Journal of Advanced Manufacturing Technology, Vol. 75, No. 1-4, pp. 293-304, 2014. |
| 80 | W. Kim, K.H. Yeom, N.T. Thien, S.T. Hong, B.K. Min, S.I. Oh, M.J. Kim, H.N. Han, and H.W. Lee, “Electrically assisted blanking using the electroplasticity of ultra-high strength metal alloys,” CIRP Annals-Manufacturing Technology, Vol. 63, No. 1, pp. 273-276, 2014. |
| 79 | K.I. Jang, E. Nam, C.Y. Lee, J. Seok, and B.K. Min, “Mechanism of synergetic material removal by electrochemomechanical magnetorheological polishing,” International Journal of Machine Tools and Manufacture, Vol. 70, pp. 88-92, 2013. |
| 78 | C.K. Choi, K.J. Lee, Y.N. Youn, E.H. Jang, W. Kim, B.K. Min, and W. Ryu, “Spatially discrete thermal drawing of biodegradable microneedles for vascular drug delivery,” European Journal of Pharmaceutics and Biopharmaceutics, Vol. 83, No. 2, pp. 224-233, 2013. |
| 77 | J. Chang, K. Koh, B.K. Min, S.J. Lee, J. Kim, and L. Lin, “Synthesis and Bidirectional Frequency Tuning of Cantilever-Shape Nano Resonators Using a Focused Ion Beam,” ACS applied materials & interfaces, Vol. 5, No. 19, pp. 9684-9690, 2013. |
| 76 | H.E. Arabi, H.E. Joe, T. Nazari, B.K. Min, and K. Oh, “A high throughput supra-wavelength plasmonic bull?혲s eye photon sorter spatially and spectrally multiplexed on silica optical fiber facet,” Optics express, Vol. 21, No. 23, pp. 28083-28094, 2013. |
| 75 | S.E. Park, S. Kim, K. Kim, H.E. Joe, B. Jung, E. Kim, W. Kim, B.K. Min, and J. Hwang, “Fabrication of ordered bulk heterojunction organic photovoltaic cells using nanopatterning and electrohydrodynamic spray deposition methods,” Nanoscale, Vol. 4, No. 24, pp. 7773-7779, 2012. |
| 74 | K.S. Park, T. Kim, W.S. Lee, H.E. Joe, B.K. Min, Y.P. Park, H. Yang, S.M. Kang, and N.C. Park, “Application of solid immersion lens-based near-field recording technology to high-speed plasmonic nanolithography,” Japanese Journal of Applied Physics, Vol. 51, No. 8S2, p. 08JF01, 2012. |
| 73 | T. Kim, W.S. Lee, H.E. Joe, G. Lim, G.J. Choi, M.G. Gang, S.M. Kang, K.S. Park, B.K. Min, and Y.P. Park, “High-speed plasmonic nanolithography with a solid immersion lens-based plasmonic optical head,” Applied Physics Letters, Vol. 101, No. 16, p. 161109, 2012. |
| 72 | K.I. Jang, D.Y. Kim, S. Maeng, W. Lee, J. Han, J. Seok, T.J. Je, S. Kang, and B.K. Min, “Deburring microparts using a magnetorheological fluid,” International Journal of Machine Tools and Manufacture, Vol. 53, No. 1, pp. 170-175, 2012. |
| 71 | H.T. Yun, S. Heo, M.K. Lee, B.K. Min, and S.J. Lee, “Ploughing detection in micromilling processes using the cutting force signal,” International Journal of Machine Tools and Manufacture, Vol. 51, No. 5, pp. 377-382, 2011. |
| 70 | S. Kang, H.E. Joe, J. Kim, Y. Jeong, B.K. Min, and K. Oh, “Subwavelength plasmonic lens patterned on a composite optical fiber facet for quasi-one-dimensional Bessel beam generation,” Applied Physics Letters, Vol. 98, No. 24, p. 241103, 2011. |
| 69 | K.I. Jang, B.K. Min, and J. Seok, “A behavior model of a magnetorheological fluid in direct shear mode,” Journal of Magnetism and Magnetic Materials, Vol. 323, No. 10, pp. 1324-1329, 2011. |
| 68 | M.S. Han, B.K. Min, and S.J. Lee, “Micro-electrochemical discharge cutting of glass using a surface-textured tool,” CIRP Journal of Manufacturing Science and Technology, Vol. 4, No. 4, pp. 362-369, 2011. |
| 67 | B.H. Yoo, B.K. Min, and S.J. Lee, “Analysis of the machining characteristics of EDM as functions of the mobilities of electrons and ions,” International Journal of Precision Engineering and Manufacturing, Vol. 11, No. 4, pp. 629-632, 2010. |
| 66 | S.M. Kang, J. Han, T. Kim, N.C. Park, K.S. Park, B.K. Min, and Y.P. Park, “Multiple excitation of localized surface plasmon to create a 10 nm횄혰 10 nm strong optical spot using an Au nanoparticle array-based ridge waveguide,” Optics Express, Vol. 18, No. 2, pp. 1576-1585, 2010. |
| 65 | Y.H. Jeong, B.K. Min, D.W. Cho, and S.J. Lee, “Motor current prediction of a machine tool feed drive using a component-based simulation model,” International Journal of Precision Engineering and Manufacturing, Vol. 11, No. 4, pp. 597-606, 2010. |
| 64 | K.I. Jang, J. Seok, B.K. Min, and S.J. Lee, “An electrochemomechanical polishing process using magnetorheological fluid,” International Journal of Machine Tools and Manufacture, Vol. 50, No. 10, pp. 869-881, 2010. |
| 63 | J. Han, H. Lee, B.K. Min, and S.J. Lee, “Prediction of nanopattern topography using two-dimensional focused ion beam milling with beam irradiation intervals,” Microelectronic Engineering, Vol. 87, No. 1, pp. 1-9, 2010. |
| 62 | J. Han, T.G. Kim, B.K. Min, and S.J. Lee, “Fabrication of nanochannels with high aspect ratios on a silicon substrate by local focused ion beam implantation and deep reactive ion etching,” Japanese Journal of Applied Physics, Vol. 49, No. 6S, p. 06GK04, 2010. |
| 61 | J. Han, T.G. Kim, B.K. Min, and S.J. Lee, “The fabrication of metal silicide nanodot arrays using localized ion implantation,” Nanotechnology, Vol. 21, No. 48, p. 485303, 2010. |
| 60 | Y. Choi, T.G. Kim, J. Han, B.K. Min, Y.J. Kim, and S.J. Lee, “Design and Fabrication of Multi-Aperture Plate for Multi-Ion Beam Patterning System,” Japanese Journal of Applied Physics, Vol. 49, No. 6S, p. 06GE06, 2010. |
| 59 | J. Seok, S.O. Lee, K.I. Jang, B.K. Min, and S.J. Lee, “Tribological properties of a magnetorheological (MR) fluid in a finishing process,” Tribology Transactions, Vol. 52, No. 4, pp. 460-469, 2009. |
| 58 | C.W. Park, K.S. Kwon, W.B. Kim, B.K. Min, S.J. Park, I.H. Sung, Y.S. Yoon, K.S. Lee, J.H. Lee, and J. Seok, “Energy consumption reduction technology in manufacturing?혬A selective review of policies, standards, and research,” International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 5, pp. 151-173, 2009. |
| 57 | B. Jung, K.I. Jang, B.K. Min, S.J. Lee, and J. Seok, “Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 5, pp. 407-418, 2009. |
| 56 | B. Jung, K.I. Jang, B.K. Min, S.J. Lee, and J. Seok, “Parameter optimization for finishing hard materials with magnetorheological fluid using the penalized multi-response Taguchi method,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 223, No. 8, pp. 955-968, 2009. |
| 55 | Y.H. Jeong, B. HanYoo, H.U. Lee, B.K. Min, D.W. Cho, and S.J. Lee, “Deburring microfeatures using micro-EDM,” Journal of materials processing technology, Vol. 209, No. 14, pp. 5399-5406, 2009. |
| 54 | K.I. Jang, J. Seok, B.K. Min, and S.J. Lee, “A behavioral model of axisymmetrically configured magnetorheological fluid using Lekner summation,” Journal of applied physics, Vol. 105, No. 7, p. 07D518, 2009. |
| 53 | K.I. Jang, J. Seok, B.K. Min, and S.J. Lee, “Behavioral model for magnetorheological fluid under a magnetic field using Lekner summation method,” Journal of Magnetism and Magnetic Materials, Vol. 321, No. 9, pp. 1167-1176, 2009. |
| 52 | K.I. Jang, J. Seok, B.K. Min, and S.J. Lee, “A 3D model for magnetorheological fluid that considers neighboring particle interactions in 2D skewed magnetic fields,” International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 1, pp. 115-118, 2009. |
| 51 | S. Heo, Y.H. Jeong, B.K. Min, and S.J. Lee, “Virtual EDM simulator: Three-dimensional geometric simulation of micro-EDM milling processes,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 12-13, pp. 1029-1034, 2009. |
| 50 | M.S. Han, B.K. Min, and S.J. Lee, “Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte,” Journal of Micromechanics and Microengineering, Vol. 19, No. 6, p. 065004, 2009. |
| 49 | J. Han, J.W. Kim, H. Lee, B.K. Min, and S.J. Lee, “Microfabrication method using a combination of local ion implantation and magnetorheological finishing,” Applied physics express, Vol. 2, No. 2, p. 026503, 2009. |
| 48 | J. Chang, B.K. Min, J. Kim, and L. Lin, “Bimorph nano actuators synthesized by focused ion beam chemical vapor deposition,” Microelectronic Engineering, Vol. 86, No. 11, pp. 2364-2368, 2009. |
| 47 | J. Chang, B.K. Min, J. Kim, S.J. Lee, and L. Lin, “Electrostatically actuated carbon nanowire nanotweezers,” Smart Materials and Structures, Vol. 18, No. 6, p. 065017, 2009. |
| 46 | H. Lee, J. Han, B.K. Min, and S.J. Lee, “Geometric Compensation of Focused Ion Beam Machining Using Image Processing,” Applied physics express, Vol. 1, No. 12, p. 127002, 2008. |
| 45 | J.W. Jung, S.H. Ko, Y.H. Jeong, B.K. Min, and S.J. Lee, “Real-time Gap Control for Micro-EDM,” International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 1, pp. 3-6, 2008. |
| 44 | J.W. Jung, Y.H. Jeong, B.K. Min, and S.J. Lee, “Model-based pulse frequency control for micro-EDM milling using real-time discharge pulse monitoring,” Journal of manufacturing science and engineering, Vol. 130, No. 3, p. 031106, 2008. |
| 43 | Y. Jeong, H. Tae, B.K. Min, and D.W. Cho, “Virtual automatic tool changer of a machining centre with a real-time simulation,” International Journal of Computer Integrated Manufacturing, Vol. 21, No. 8, pp. 885-894, 2008. |
| 42 | M.S. Han, B.K. Min, and S.J. Lee, “Modeling gas film formation in electrochemical discharge machining processes using a side-insulated electrode,” Journal of Micromechanics and Microengineering, Vol. 18, No. 4, p. 045019, 2008. |
| 41 | J. Seok, Y.J. Kim, K.I. Jang, B.K. Min, and S.J. Lee, “A study on the fabrication of curved surfaces using magnetorheological fluid finishing,” International Journal of Machine Tools and Manufacture, Vol. 47, No. 14, pp. 2077-2090, 2007. |
| 40 | J.W. Jung, S.H. Ko, Y.H. Jeong, B.K. Min, and S.J. Lee, “Estimation of material removal volume of a micro-EDM drilled hole using discharge pulse monitoring,” International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 45-49, 2007. |
| 39 | Y.H. Jeong and B.K. Min, “Geometry prediction of EDM-drilled holes and tool electrode shapes of micro-EDM process using simulation,” International Journal of Machine Tools and Manufacture, Vol. 47, No. 12-13, pp. 1817-1826, 2007. |
| 38 | M.S. Han, B.K. Min, and S.J. Lee, “Improvement of surface integrity of electro-chemical discharge machining process using powder-mixed electrolyte,” Journal of Materials Processing Technology, Vol. 191, No. 1-3, pp. 224-227, 2007. |
| 37 | S.J. Park and S.J. Lee, “Fabrication of the Fine Magnetic Abrasives by Using Mechanical Alloying Process and its Polishing Characteristics,” in Key Engineering Materials , 2006, vol. 326, pp. 421-424: Trans Tech Publ. |
| 36 | J.H. Jung, J.P. Choi, and S.J. Lee, “Machining accuracy enhancement by compensating for volumetric errors of a machine tool and on-machine measurement,” Journal of Materials Processing Technology, Vol. 174, No. 1-3, pp. 56-66, 2006. |
| 35 | Y.H. Jeong, B.K. Min, and D.W. Cho, “Estimation of machine tool feed drive inclination from current measurements and a mathematical model,” International Journal of Machine Tools and Manufacture, Vol. 46, No. 12-13, pp. 1343-1349, 2006. |
| 34 | K.G. Ahn, B.K. Min, and Z.J. Pasek, “Modeling and compensation of geometric errors in simultaneous cutting using a multi-spindle machine tool,” The International Journal of Advanced Manufacturing Technology, Vol. 29, No. 9-10, pp. 929-939, 2006. |
| 33 | Y.T. Kim, S.J. Park, and S.J. Lee, “Micro/meso-scale shapes machining by micro EDM process,” International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 2, pp. 5-11, 2005. |
| 32 | E.G. Kang, S.J. Park, and S.J. Lee, “Development of in situ system to monitor the machining process using a piezo load cell,” The International Journal of Advanced Manufacturing Technology, Vol. 25, No. 7-8, pp. 647-651, 2005. |
| 31 | S.J. Park, W.B. Kim, and S.J. Lee, “A Study on the Surface Finishing Technique using Electrorheological Fluid,” International Journal of Precision Engineering and Manufacturing, Vol. 5, No. 2, pp. 32-38, 2004. |
| 30 | S.N. Lee, J.I. Lee, W.B. Kim, J.G. Yook, Y.J. Kim, and S.J. Lee, “Conductor ??loss reduction for high ??frequency transmission lines based on the magnetorheological ??fluid polishing method,” Microwave and Optical Technology Letters, Vol. 42, No. 5, pp. 405-407, 2004. |
| 29 | W.B. Kim, S.J. Park, B.K. Min, and S.J. Lee, “Surface finishing technique for small parts using dielectrophoretic effects of abrasive particles,” Journal of materials processing technology, Vol. 147, No. 3, pp. 377-384, 2004. |
| 28 | W.B. Kim, S.H. Lee, and B.K. Min, “Surface finishing and evaluation of three-dimensional silicon microchannel using magnetorheological fluid,” Journal of manufacturing science and engineering, Vol. 126, No. 4, pp. 772-778, 2004. |
| 27 | W.B. Kim, B.K. Min, and S.J. Lee, “Development of a padless ultraprecision polishing method using electrorheological fluid,” Journal of Materials Processing Technology, Vol. 155, pp. 1293-1299, 2004. |
| 26 | W. Choi, J. Lee, W.B. Kim, B.K. Min, S. Kang, and S.J. Lee, “Design and fabrication of tungsten carbide mould with micro patterns imprinted by micro lithography,” Journal of Micromechanics and Microengineering, Vol. 14, No. 11, p. 1519, 2004. |
| 25 | J..P. Choi, B.K. Min, and S.J. Lee, “Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system,” Journal of Materials Processing Technology, Vol. 155, pp. 2056-2064, 2004. |
| 24 | W.B. Kim, S.J. Lee, Y.J. Kim, and E.S. Lee, “The electromechanical principle of electrorheological fluid-assisted polishing,” International Journal of Machine Tools and Manufacture, Vol. 43, No. 1, pp. 81-88, 2003. |
| 23 | J.P. Choi, S.J. Lee, and H.D. Kwon, “Roundness error prediction with a volumetric error model including spindle error motions of a machine tool,” The International Journal of Advanced Manufacturing Technology, Vol. 21, No. 12, pp. 923-928, 2003. |
| 22 | Z.J. Pasek, B.K. Min, S. Marker, and F. Husted, “Web-enabled monitoring and control of manufacturing systems,” Advances in Manufacturing Science and Technology, Vol. 26, No. 1, pp. 5-16, 2002. |
| 21 | B.K. Min, G. O’NEAL, Y. Koren, and Z.J. Pasek, “Cutting process diagnostics utilising a smart cutting tool,” Mechanical systems and signal processing, Vol. 16, No. 2-3, pp. 475-486, 2002. |
| 20 | B.K. Min, G. O’Neal, Y. Koren, and Z.J. Pasek, “A smart boring tool for process control,” Mechatronics, Vol. 12, No. 9-10, pp. 1097-1114, 2002. |
| 19 | B.K. Min, Z. Huang, Z.J. Pasek, D. Yip-Hoi, F. Husted, and S. Marker, “Integration of real-time control simulation to a virtual manufacturing environment,” Journal of advanced manufacturing systems, Vol. 1, No. 01, pp. 67-87, 2002. |
| 18 | M.G. Mehrabi, G. O’neal, B.K. Min, Z.J. Pasek, Y. Koren, and P. Szuba, “Improving machining accuracy in precision line boring,” Journal of Intelligent Manufacturing, Vol. 13, No. 5, pp. 379-389, 2002. |
| 17 | G.P. O?혲neal, B.K. Min, Z.J. Pasek, and Y. Koren, “Integrated structural/control design of micro-positioner for boring bar tool insert,” Journal of Intelligent Material Systems and Structures, Vol. 12, No. 9, pp. 617-627, 2001. |
| 16 | R.G. Landers, B.K. Min, and Y. Koren, “Reconfigurable machine tools,” CIRP Annals-Manufacturing Technology, Vol. 50, No. 1, pp. 269-274, 2001. |
| 15 | J.P. Choi and S.J. Lee, “Efficient chip breaker design by predicting the chip breaking performance,” The International Journal of Advanced Manufacturing Technology, Vol. 17, No. 7, pp. 489-497, 2001. |
| 14 | C.W. Park, D.E. Kim, and S.J. Lee, “Shape prediction during the cylindrical traverse grinding of a slender workpiece,” Journal of Materials Processing Technology, Vol. 88, No. 1-3, pp. 23-32, 1999. |
| 13 | J.H. Lee and S.J. Lee, “One-step-ahead prediction of flank wear using cutting force,” International Journal of Machine Tools and Manufacture, Vol. 39, No. 11, pp. 1747-1760, 1999. |
| 12 | K.B. Kwon, D.W. Cho, S.J. Lee, and C.N. Chu, “A fluid dynamic analysis model of the ultra-precision cutting mechanism,” CIRP Annals-Manufacturing Technology, Vol. 48, No. 1, pp. 43-46, 1999. |
| 11 | D.H. Hwang, I.H. Sung, D.E. Kim, and S.J. Lee, “Effects of material pair properties on the frictional behavior of metals,” Wear, Vol. 225, pp. 600-614, 1999. |
| 10 | D.H. Hwang, D.E. Kim, and S.J. Lee, “Influence of wear particle interaction in the sliding interface on friction of metals,” Wear, Vol. 225, pp. 427-439, 1999. |
| 9 | D.W. Cho, S.J. Lee, and C.N. Chu, “The state of machining process monitoring research in Korea,” International Journal of Machine Tools and Manufacture, Vol. 39, No. 11, pp. 1697-1715, 1999. |
| 8 | J.H. Lee, D.E. Kim, and S.J. Lee, “Statistical analysis of cutting force ratios for flank-wear monitoring,” Journal of materials processing technology, Vol. 74, No. 1-3, pp. 104-114, 1998. |
| 7 | D.H. Hwang, W.H. Park, D.E. Kim, S.J. Lee, D.S. Yoo, K.M. Kim, and K.C. Choi, “Tribological Behavior of TiN and DLC Coated VCR Drums,” in Advances In Information Storage Systems: Selected Papers from the International Conference on Micromechatronics for Information and Precision Equipment (MIPE’97) Volume 9 , 1998, pp. 335-351: World Scientific. |
| 6 | B.k. Min, D.W. Cho, S.J. Lee, and Y.P. Park, “Sonar mapping of a mobile robot considering position uncertainty,” Robotics and computer-integrated manufacturing, Vol. 13, No. 1, pp. 41-49, 1997. |
| 5 | B.K. Min, D.W. Cho, S.J. Lee, and Y.P. Park, “Exploration of a mobile robot based on sonar probability mapping,” Journal of dynamic systems, measurement, and control, Vol. 118, No. 1, pp. 150-157, 1996. |
| 4 | J.H. Lee, D.E. Kim, and S.J. Lee, “Application of neural networks to flank wear prediction,” Mechanical Systems and Signal Processing, Vol. 3, No. 10, pp. 265-276, 1996. |
| 3 | J.B. Kim, S.J. Lee, and Y.P. Park, “Stable and efficient drilling process by active control of the thrust force,” Mechanical Systems and Signal Processing, Vol. 8, No. 5, pp. 585-595, 1994. |
| 2 | J.B. Kim, S.J. Lee, and Y.P. Park, “Development of a drilling process with torque stabilization,” Journal of Manufacturing Systems, Vol. 13, No. 6, pp. 435-441, 1994. |
| 1 | S.J. Lee, K.F. Eman, and S.M. Wu, “An analysis of the drill wandering motion,” Journal of Engineering for Industry, Vol. 109, No. 4, pp. 297-305, 1987. |
DOMESTIC JOURNAL
DOMESTIC JOURNAL
| No. | Domestic Journal |
|---|---|
| 28 | 강준구, 민병권, and 강은구, “전자빔을 이용한 미세 홀 가공 시 전자빔 조사량 변화에 따른 용융깊이 특성 연구,” 한국정밀공학회지, Vol. 38, No. 3, pp. 169-176, 2021. |
| 27 | 이찬영, 김성현, 하태인, 민재홍, 황순홍, and 민병권, “정밀가공을 위한 CNC 알고리즘 연구 현황,” 한국정밀공학회지, Vol. 35, No. 3, pp. 279-291, 2018. |
| 26 | 이찬영, 민재홍, and 민병권, “CNC 보간기의 코너 블렌딩에 의한 경로계획오차의 한계설정,” 한국정밀공학회지, Vol. 34, No. 10, pp. 695-700, 2017. |
| 25 | 강명구, 민병권, 김태곤, and 이석우, “액체질소 분사 안정화를 통한 극저온가공 품질 향상,” 한국정밀공학회지, Vol. 34, No. 4, pp. 247-251, 2017. |
| 24 | 이동준, 박재형, 이원균, and 민병권, “가상제조환경에서 제품의 표면 거칠기 전달을 위한 촉각 디스플레이,” 한국정밀공학회지, Vol. 33, No. 1, pp. 17-22, 2016. |
| 23 | 김규호, 하태인, 이찬영, 안재훈, 김주영, 민병권, 김태곤, and 이석우, “탄소섬유복합재 가공의 결함특성 및 결함 저감을 위한 경계검출,” 한국정밀공학회지, Vol. 33, No. 6, pp. 453-458, 2016. |
| 22 | 이원균, 이찬영, 김주영, 송창규, and 민병권, “CNC 제어 이송계의 Hardware-in-the-loop 시뮬레이션,” 한국정밀공학회지, Vol. 32, No. 5, pp. 447-454, 2015. |
| 21 | 허세곤, 이원균, 민병권, and 제태진, “미세밀링공정의 최근 연구동향,” 한국기계가공학회지, Vol. 11, No. 2, pp. 20-26, 2012. |
| 20 | 최성창, 강인철, 한재길, 김태곤, and 민병권, “다개구 이온빔 가공장치용 냉음극 방식의 가스 이온원의 가능성 평가에 관한 연구,” 한국정밀공학회지, Vol. 28, No. 3, pp. 383-388, 2011. |
| 19 | 이승훈, 김도근, 강재욱, 김태곤, 민병권, and 김종국, “유도결합형 플라즈마 소스를 이용한 집속 이온빔용 가스 이온원 개발,” 한국정밀공학회지, Vol. 28, No. 1, pp. 19-23, 2011. |
| 18 | 송창규, 김병섭, 노승국, 이성철, 민병권, and 정영훈, “기계장비 제어특성 시뮬레이션 플랫폼 기술,” 한국정밀공학회지, Vol. 28, No. 3, pp. 292-300, 2011. |
| 17 | 한민희, 한진, 김태곤, 민병권, and 이상조, “선택적 빔 차단을 통한 집속이온빔 가공 정밀도 향상,” 한국정밀공학회지, Vol. 27, No. 8, pp. 84-90, 2010. |
| 16 | 이희원, 한진, 민병권, and 이상조, “마이크로-나노 가공을 위한 집속이온빔 공정 시뮬레이션,” 한국정밀공학회지, Vol. 25, No. 3, pp. 44-49, 2008. |
| 15 | 박성준, 이성준, 최석문, and 이상조, “미세가공기술을 이용한 초소형 광픽업용 대면적 실리콘 미러 제작,” 한국정밀공학회지, Vol. 23, No. 1, pp. 89-96, 2006. |
| 14 | 신주경, 민병권, 김영주, and 강신일, “미소 렌즈가 내재화된 이중사출 성형제품의 웰드라인 최소화,” 한국소성가공학회지 제, Vol. 13, No. 3, pp. 230-235, 2004. |
| 13 | 박성준 and 이상조, “기계적 합금화 공정을 이용한 초미세 자성연마입자의 제조 및 특성 평가,” 한국정밀공학회지, Vol. 21, No. 10, pp. 34-41, 2004. |
| 12 | 박성준, 안병운, and 이상조, “미세공구와 자기체인구조를 이용한 초정밀 폴리싱 특성,” 한국정밀공학회지, Vol. 21, No. 8, pp. 34-42, 2004. |
| 11 | 박성준, 김영태, and 이상조, “밸브시트 재료의 갤링 특성에 관한 실험적 연구,” 한국정밀공학회지, Vol. 21, No. 3, pp. 100-108, 2004. |
| 10 | 박성준, 김영태, 민병권, and 이상조, “마이크로 방전가공에서 Round Trip Method 를 이용한 전극마모 보정,” 한국정밀공학회지, Vol. 21, No. 10, pp. 42-49, 2004. |
| 9 | 한성종, 최진필, and 이상조, “신경회로망과 실험계획법을 이용한 칩형상 예측,” 한국정밀공학회지, Vol. 20, No. 11, pp. 64-70, 2003. |
| 8 | 최진필, 민병권, and 이상조, “기상측정시스템과 오차보정을 이용한 가공정밀도 향상,” 한국정밀공학회지, Vol. 20, No. 12, pp. 34-41, 2003. |
| 7 | 이호준, 안건준, 김동길, 이상조, 최헌종, and 최영재, “광통신용 페룰 동축가공기 개발을 위한 설계, 제작 및 척킹압에 따른 가공 특성 평가,” 한국정밀공학회지, Vol. 20, No. 7, pp. 7-12, 2003. |
| 6 | 이성재, 김욱배, 박성준, and 이상조, “전기점성유체를 이용한 단결정 실리콘의 초정밀 연마에 관한 연구,” 한국정밀공학회지, Vol. 20, No. 6, pp. 27-36, 2003. |
| 5 | 김영태, 박성준, and 이상조, “Micro-EDM 공정을 이용한 미세 형상 가공,” 한국정밀공학회지, Vol. 20, No. 9, pp. 109-117, 2003. |
| 4 | 김동길, 박성준, 김영태, and 이상조, “원추형 센터와 볼형 센터를 이용한 페룰 동축 연삭시 척킹에 관한 연구 : 척킹 오차 해석,” 한국정밀공학회지, Vol. 20, No. 2, pp. 40-49, 2003. |
| 3 | 윤원수 and 민병권, “소프트웨어 기반의 개방형 제어기를 통한 가상 CNC 개발,” 한국정밀공학회지, Vol. 19, No. 6, pp. 23-28, 2002. |
| 2 | 최현, 박건록, 김두훈, and 이상조, “점탄성재료의 동적특성 측정에 관한 연구,” 한국소음진동공학회 학술대회논문집, pp. 35-41, 1997. |
| 1 | 박영필 and 이상조, “탄성계의 진동 제어,” 제어로봇시스템학회 국내학술대회 논문집, Vol. 1, pp. 113-118, 1986. |